Cuisinart HFP-300 - PrepExpress Handheld Food Processor Specifications download pdf (Page 6)

6

2. Attach the food chamber assembly to

the motorized base. With the handle in

your right hand and holding the food

chamber at a 15° angle, line up the line

on the food chamber with the line on the

housing. The driving end of the assembly

must be fully inserted into the socket of

the motorized base. Next, while pushing

the food chamber assembly firmly in

toward the handle, rotate the assembly

counterclockwise until it is upright and

it is centered with the handle.

3. Plug cord in and load the food chamber.

For best results, it is important that the

food be prepared and properly placed

in the food chamber as follows:

• Cut food so that it will easily fit into the

feed tube.

• Stack food upright into the feed tube

for short pieces or vertically for longer

pieces.

4. Begin processing by pushing down the

switch and evenly pushing the food

down, using the pusher.

5. The processed food will be released from

the front of the unit, directly into your

bowl or platter.

USE AND CARE

1. Keep hands as well as spatulas and

other utensils away from moving drums

while processing food, to prevent the

possibility of severe personal injury or

damage to the food processor. A plastic

scraper may be used, but only when the

food processor motor is stopped.

2. Avoid contact with moving parts. Never

push food down into feed tube by hand

when slicing, shredding, or grating.

Always use pusher.

3. The exterior of the drums are sharp.

Store drums as you would other sharp

objects, out of reach of children.

2. Insert food chamber into base.

3. Twist food chamber on base to lock

position.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments