Cuisinart Buona Tazza Specifications download pdf (Page 9)

8

NOTE: It is recommended to

use more froth

for

cappuccino and latte. If you

prefer less froth, use the

setting.

5. Press either the Cappuccino or Latte

button.

6.

The foamed milk will be

dispensed into the mug,

followed by Cuisinart’s

patented Burst of Steam

feature that quickly cleans the steam wand.

Espresso is then immediately dispensed.

Tips for creating a perfect froth:

Milk frothing is the steaming of milk. The steam

does two things; it heats milk and it mixes in air

to form a foamy texture. As with anything,

perfecting the art of milk

texturing takes practice,

but the results are well

worth it!

Use cold,

refrigerated milk in the

milk tank. Any type of

milk may be used, but for best results, skim

is recommended. Keep in mind that the milk

volume will increase during frothing, so use a

large enough mug.

NOTE: If the milk tank is not installed or

placed in the unit correctly, the STEAM

,

CAPPUCCINO

and LATTE LEDs will

not light. Only lit LEDs are active functions.

TEMPERATURE

CONTROLS

Hotter is the default setting. If Hot is

desired, press the

button and allow a few

seconds for the temperature to decrease.

The flashing light will turn steady when it has

reached temperature.

Energy Saver Mode

After 30 minutes of non-use the espresso

machine will automatically switch to sleep

mode and all the control lights will be

dimmed by about 50%. When any button is

pressed, the espresso machine will return to

preheat mode and all the lights will flash.

The machine is ready to operate when all

the lights are steady again.

Auto-Off Mode

Following the

30-minute Energy

Saver cycle, if there

is an additional 30

minutes of non-use,

the espresso machine

will turn off. Press the power button to turn

on again.

CLEANING AND

MAINTENANCE

Cleaning External Parts

We recommend regular cleaning of the

espresso maker’s external components.

1. Never immerse the machine in water or

other liquids. The housing and external parts

may be cleaned with a soapy, damp, non-

abrasive cloth.

2. To remove the drip tray, simply slide it

toward you, keeping it level at all times in

order to prevent spills. The drip tray and drip

tray plate are dishwasher safe. Do not clean

drip tray with cleansers, steel wool pads or

other abrasive materials.

Cleaning the Water Reservoir

It is normal over time for discoloration,

spotting or staining to appear in the water

reservoir. Results will vary depending on the

mineral content of the bottled or filtered

water used but will not affect the operation

of the machine. However, be sure to clean

the water reservoir regularly to minimize

build up.

Clean inside the water reservoir with a damp,

lint-free cloth as necessary.

Cleaning the Milk Tank

For best results cleaning the milk tank, please

follow these instructions: Remove the milk tank by

holding the tank and cover and pull aw ay from the

machine. Remove the cover and pour water into

the tank. Replace the cover, align the milk tank to

the connector on the side of the machine, and

push to install. Place a mug on the drip tray and

position the steam wand into the mug. Adjust the

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments