Cuisinart DGB-475BK Instruction Manual download pdf (Page 11)

9

programmed either before or during coffee

brewing. You may also re-program the ASO

time when brewing has been completed. If you

do so, the Grind & Brew

™

will automatically

account for any time that has already elapsed

after brewing. For example, if you set the ASO

for 40 minutes and 25 minutes have already

elapsed, the Grind & Brew

™

will shut off auto-

matically after 15 minutes (40 minutes minus

the 25 elapsed equals 15 minutes).

Turning off Grind Function

To turn off the grinding function, press the

Grind Off button. An amber LED will be

illuminated. Then press the On button.

CHANGING THE

WATER FILTER

a. Remove the filter from polybag and soak

in cold tap water for 15 minutes.

b. Remove the water filter holder from

the coffeemaker by lifting it out of

the reservoir area with your thumb

and forefinger.

c. Grasp stem in one hand. Using thumb of

other hand, gently press down and pull

toward you. Compartment will ip open.

d. Place the lter in the holder and close the

water lter holder; you will hear a snap

indicating it is in place.

NOTE: Caution must be used when inserting

the charcoal filter. Improper placement in the

holder can cause tearing of the filter skin.

e. Hold the lter under cold running tap

water for 10 seconds to ush. You should

place the hole openings in the side of the

unit directly under the water stream.

f. Allow the lter to drain completely.

g. Replace the water lter holder in the

reservoir area of the coffeemaker, pushing

it all the way down to the base of the unit,

along the reservoir wall.

Note: We recommend changing the water

lter every 60 days or 60 uses, more often

if you have hard water. Replacement water

lters can be purchased in stores or by

calling customer service or through the

Cuisinart web site.

MAKING COFFEE

Before you make the first pot of coffee in your

new Cuisinart

®

Grind & Brew

™

Automatic

coffeemaker, we recommend operating the

coffeemaker once, using only water and a

paper filter. This will remove any dust or

residues which remain in the system from

the manufacturing process.

1. Fill the Water Reservoir

Open the reservoir lid by pushing the release

button and lifting up. Pour the desired amount

of water in the reservoir using the step water

indicator located at the rear of the reservoir.

2. Add Beans

Lift the grinder basket lid, using the recess

on either side. Fill the basket with the desired

quantity of beans.

Use 1 level scoop of whole beans per cup.

For 1 to 4 cups, use 1½ level scoops per cup.

Maximum capacity for whole beans is 14

level scoops. Do not overfill or the grinder

could malfunction and/or the coffeemaker

may overflow. This is our suggested recipe.

Adjust the recipe to taste.

3. Open Filter Door

Place a #4 basket paper filter or Cuisinart’s

®

commercial style permanent filter in

the basket.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments