Cuisinart DCC-3000 Specifications download pdf (Page 8)

5. Flush filter by

running fresh

water through the

hole in bottom of

compartment for

10 seconds.

6. Allow the filter to

drain completely.

7. Place the assem-

bled water filter

holder into the

water reservoir,

pushing it down

to fit into place

(see figure 3).

Note: We recommend changing the water filter every

60 days or after 60 uses, and more often if you have

hard water. Replacement filters can be purchased in

stores, by calling Cuisinart Customer Service, or at

www.cuisinart.com.

PROGRAMMING YOUR

COFFEEMAKER

SETTING THE CLOCK

When the coffeemaker is plugged in, 12:00 will appear

until you set the time.

Turn the Function knob to CLOCK

Hold down the Hour or Minute button until the clock

begins flashing. Press either button to select the desired

time. Hold buttons down to scroll through the digits, or

press and release to advance one digit at a time. When

scrolling, the numbers will advance slowly and then

speed up, so as number displayed approaches the

desired time, press and release to advance one digit at

a time. Be sure the PM indicator is on if a PM time is

desired.

SETTING THE AUTO ON TIME

When you turn the Function knob to PROG, it displays a

previously selected Auto On time or the default time

(12:00pm).

1 . Turn the Function knob to PROG

Follow directions under SETTING THE CLOCK

(in previous section) to program your start-brew time.

2. Turn the Function knob to AUTO ON

LCD will display the current time.

3. Press and release ON/OFF button

A green light indicates that the coffeemaker is in

Auto On mode. The blue ON/OFF light will come on

when brew cycle begins. Both lights will go off when

Keep Warm cycle ends.

NOTE: To start brew time at the same time the next

day, simply make sure the Function knob is on Auto

On and press and release ON/OFF button once more.

Green Auto On light will go on.

SETTING THE AUTO OFF TIME

Turn the Function Knob to AUTO OFF

The default Auto Off time is set to turn the coffeemaker

off two hours after brewing is complete. Follow

directions under SETTING THE CLOCK (in previous

section) to program your coffeemaker to shut off from 0

to 4 hours after brew cycle is finished.

MAKING COFFEE

1. Insert charcoal water filter

Follow directions on page 6, for the preparation and

insertion of the filter.

2. Fill the water reservoir

a. Remove lid from reservoir, then lift reservoir

straight up and away from the coffeemaker.

b. Fill reservoir with water for the number of cups

you are brewing and return with lid to unit

(see figure 1).

NOTE: If water gets under the coffee tank or water

reservoir, it will end up in the drip tray.

3. Set preferences

Push the 1–4 Cup button if you are brewing fewer

than 5 cups.

4. Add the ground coffee

Insert a #4 paper filter OR permanent filter into the

filter basket.

Be sure that the paper filter is completely

open and fully inserted in the basket.

It may help to

fold and flatten the seams of a paper filter beforehand.

Add 1 scoop (1 tablespoon = ~6 grams) of ground

coffee per cup. Adjust the amount according to taste.

figure 4

BEFORE BREWING YOUR

FIRST POT OF COFFEE

During the manufacturing process, dust can get trapped

in your coffeemaker. We recommend flushing out the

system before brewing your first cups of coffee. Simply

fill the water reservoir and power on the unit. (See steps

#2 and #6 in MAKING COFFEE instructions, below).

DO NOT ADD COFFEE!

Once you’ve done that, brew your favorite coffee and

get ready to enjoy Cuisinart at its best!

figure 3

Charcoal Water

Filter

Water

Reservoir

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Cuisinart DCC-3000 Specifications Page 8

Comments to this Manuals

Related products and manuals for Coffee makers Cuisinart DCC-3000